Stacker SBR12-20N2(I)(S) Series
- 1.2–2.0 Tonnes
- 24 Volts
- AC-power
Small spaces
big performance
If you are looking to maximise the efficiency of your warehouse space, stand-in stackers may be the perfect choice for you. Combining minimal dimensions, a tight turning circle, and excellent operator protection, they offer an affordable and flexible alternative to a full VNA solution. By keeping the driver completely — and safely protected — within the truck, they can manoeuvre in much smaller aisle width.
Wide straddle models are available with lower profile forged forks to allow greater flexibility in pallet handling, including closed and specialised load carrier material. These models also enable the use of a variety of special handling attachments e.g. spikes, clamps, rolls, etc.
Designing a warehouse around stand-in stackers is up to 35% more efficient from a space point of view compared to pedestrian stackers, typically lowering the cost per pallet position by a third. The compact profile also potentially allows for two-way traffic in aisles vs a reach truck, allowing for increased productivity.
And standing is the most efficient position for an operator from a working point of view, easily allowing them to frequently step on and off throughout a shift. There is ample space to work while still offering excellent all-round protection while working, and by being entirely within the truck they are better protected against collisions.
| Model | Capacity |
|---|---|
| SBR12N2 | 1250 kg |
| SBR12N2I | 1250 kg |
| SBR16N2 | 1600 kg |
| SBR16N2I | 1600 kg |
| SBR16N2S | 1600 kg |
| SBR20N2 | 2000 kg |
| SBR20N2I | 2000 kg |
| SBR20N2S | 2000 kg |
Feature highlights
Standing vs regular
By keeping the operator completely within the truck, not only are they better protected in cases of accident or impact, but the truck itself can be more compact and manoeuvrable, allowing for use in narrower aisles.
Enhanced Stability System (ESS)
As well as the high-stability chassis design, additional automatic systems are in place to automatically reduce acceleration during sharper turns and reduce drive speed when forks are above 1.7 m.
Ergo Forks Trailing Control
When travelling over long distances with forks trailing, this additional control option allows for a more comfortable standing position with the operator facing forward. (Option)
Intelligent Cornering System
The truck senses the angle of a turn and reduces speed early. This makes for much safer handling with maximum stability and accurate, positive cornering.
Li-ion battery
This option allows for quick charging, while minimising maintenance – avoiding the need for costly extra batteries and time-consuming changeovers. (Option)
Wide straddle models
Positioning the legs on the outside of a pallet allows the forks to work with close-bottomed pallets and specialised loads. The open space also enable the use of a variety of special handling attachments e.g. spikes, clamps, rolls, etc. Standard width between straddles is 750 mm or 950 mm. Other widths are available if required.
Images
Videos
AXiA EX
If you are looking to maximise the efficiency of your warehouse space, stand-in stackers may be the perfect choice for you. Combining minimal dimensions, a tight turning circle, and excellent operator protection, they offer an affordable and flexible alternative to a full VNA solution. By keeping the driver completely — and safely protected — within the truck, they can manoeuvre in much smaller aisle width.
AXiA EX / XL RS Camera Option
Top features
Intelligent Cornering System
The truck senses the angle of a turn and reduces speed early for maximum stability and accurate, positive cornering.
360-degree steering
The operator can keep the truck in constant motion – saving seconds on every turn. (Option)
Built-in Li-ion battery
Fast opportune charging removes the need for extra batteries and allows 24/7 operation. (Junior chassis only) (Option)
Enhanced Stability System (ESS)
4-point chassis for maximum stability, drive speed is reduced when forks are lifted, and acceleration is reduced when steering angle exceeds 45 degrees.
Wide Straddle Legs
Tandem wheels and low profile forged forks as standard. A variety of specialised handling assemblies can be used in place of the fork carriage. (Wide straddle models only)
Ergo Forks Trailing Control
When working with forks trailing, an additional speed control allows an operator to stand in a more comfortable and ergonomic forward-facing position while travelling. (Option)
Automatic Speed Reduction
Drive speed is automatically limited when forks are above 1.52 m (1.6 tonne models) or 1.44 m (2.0 tonne models) to allow higher capacities above that height.
Dynamic Power Steering
Smooth, precise control with minimum effort offering maximum comfort and stability at top speed.
